MEP Contracting
MEP by location
Specialized
HVAC Contracting
HVAC by location
Connect a new branch to a live, pressurised pipe without shutting the system down.
Service reference X-02
Hot Tapping, also called live tapping or pressure tapping, is a method of making a new branch connection to a pipe while it stays in service and under pressure. A fitting and valve are fixed to the pipe, a tapping machine cuts through the pipe wall through the open valve, and the cutter is withdrawn and the valve closed, leaving a new isolatable branch.
When a building extension, new AHU or temporary chiller needs a connection to an existing main, shutting the main down affects the whole facility. Hot Tapping makes the connection while the system keeps running.
White Arch carries out Hot Tapping on chilled-water, condenser water, fire water and domestic water mains in operating buildings and plant, and combines it with Pipe Freezing when isolation is also needed.
Pipe material, wall thickness, pressure, temperature and fluid are assessed before each tap, and the fitting is pressure-tested before the cut.
The system stays in service throughout, so occupants and operations are not affected.
Hot Tapping is especially valuable during Chiller Replacement in the UAE: temporary chillers can be connected to live systems so that cooling continues while the permanent plant is changed.
Yes. Chilled-water, condenser water, fire water and domestic water mains can be hot tapped after an engineering assessment of the pipe and operating conditions.
Hot Tapping adds a new connection to a live pipe. Pipe Freezing isolates a section of pipe so that something can be removed or replaced. They are often used together.
✦ / Start a conversation
New installations, system replacements and complex retrofits, from an empty drawing to a commissioned system. Share your drawings, BOQ or requirement with our engineering team.
Direct line +971 2 643 7371 · info@whitearch.ae